manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 171 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 171

87

4

4

Features of your vehicle

Warning and indicator lights

Immobiliser Indicator Light (With 
Smart Key) 

This indicator light illuminates for 
up to 30 seconds:

僅 When the vehicle detects the smart 

key in the vehicle properly whilst the 
ignition switch or is ACC or ON.
- At this time, you can start the 

engine.

- The indicator light goes off after 

starting the engine.

This indicator light blinks for a 
few seconds:

僅 When the smart key is not in the vehi

-

cle.
- At this time, you can not start the 

engine.

This indicator light illuminates for 
2 seconds and goes off:

僅 When the vehicle can not detect the 

smart key which is in the vehicle 
whilst the ENGINE START/STOP but

-

ton is ON.
In this case, have the vehicle 
inspected by a professional workshop. 
Kia recommends to visit an authorised 
Kia dealer/service partner.

This indicator light blinks:

僅 When the battery of the smart key is 

weak.
- At this time, you can not start the 

engine. However, you can start the 
engine if you press the ENGINE 
START/STOP button with the smart 
key. (For more details, refer to 
"Immobiliser system" on page 4-14).

僅 When there is a malfunction with the 

immobiliser system.

In this case, have the vehicle 
inspected by a professional workshop. 
Kia recommends to visit an authorised 
Kia dealer/service partner.

Turn signal indicator light 

This indicator light blinks:

僅 When you turn the turn signal light on.
If any of the following occurs, there may 
a malfunction with the turn signal sys

-

tem. In this case, have the vehicle 
inspected by a professional workshop. 
Kia recommends to visit an authorised 
Kia dealer/service partner.
僅 The indicator light does not blink but 

illuminates.

僅 The indicator light blinks more rapidly.
僅 The indicator light does not illuminate 

at all.

Low beam indicator light 

 (if 

equipped)

This indicator light illuminates:

僅 When the headlights are on.

High beam indicator light 

This indicator light illuminates:

僅 When the headlights are on and in the 

high beam position.

僅 When the turn signal lever is pulled 

into the Flash-to-Pass position.

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments