manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 166 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 166

Features of your vehicle

82

4

Warning and indicator lights

Motor Driven Power Steering 
(MDPS) warning light 

This warning light illuminates:

僅 Once you set the ignition switch 

orENGINE START/STOP button to the 
ON position.
- This indicator light comes on after 

the ignition key is turned to the ON 
position and then goes out after 
approximately 3 seconds.

僅 When there is a malfunction with the 

MDPS.
In this case, have the vehicle 
inspected by a professional workshop. 
Kia recommends to visit an authorised 
Kia dealer/service partner.

Charging System Warning Light 

This warning light illuminates:

僅 When there is a malfunction with 

either the alternator or electrical 
charging system.

If there is a malfunction with 
either the alternator or electrical 
charging system:

1. Drive carefully to the nearest safe 

location and stop your vehicle.

2. Turn the engine off and check the 

alternator drive belt for looseness or 
breakage.
In this case, have the vehicle 
inspected by a professional workshop. 
Kia recommends to visit an authorised 
Kia dealer/service partner.

Malfunction Indicator Lamp (MIL) 

This warning light illuminates:

僅 When you set the ignition switch or 

the ENGINE START/STOP button to 
the ON position.
- The malfunction indicator light illu

-

minates for about 3 seconds and 
then goes off.

僅 Whenever there is a malfunction with 

either the emission control system or 
the engine or the vehicle powertrain.
If this occurs, we recommend that you 
have the vehicle inspected by an 
authorised Kia dealer/service partner.

NOTICE

Driving with the Malfunction Indicator 
Lamp (MIL) on may cause damage to 
the emission control system which could 
affect drivability and/or fuel economy.

CAUTION

If the Malfunction Indicator Lamp (MIL) 
illuminates, potential catalytic converter 
damage is possible which could result in 
loss of engine power. In this case, we 
recommend that you have the vehicle 
inspected by an authorised Kia dealer/
service partner as soon as possible.

Engine Oil Pressure Warning 
Light 

This warning light illuminates:

僅 When the engine oil pressure is low.

- Drive carefully to the nearest safe 

location and stop your vehicle.

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments