manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 164 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 164

Features of your vehicle

80

4

Warning and indicator lights

Parking brake & brake fluid 
warning light

This warning light illuminates:

僅 Once you set the ignition switch 

orENGINE START/STOP button to the 
ON position.
- It illuminates for approximately 3 

seconds

- It remains on if the parking brake is 

applied.

僅 When the parking brake is applied.
僅 When the brake fluid level in the res

-

ervoir is low.
- If the warning light illuminates with 

the parking brake released, it indi

-

cates the brake fluid level in reser

-

voir is low.

If the brake fluid level in the res

-

ervoir is low:

1. Drive carefully to the nearest safe 

location and stop your vehicle.

2. With the engine stopped, check the 

brake fluid level immediately and add 
fluid as required (For more details, 
refer to "Brake/clutch fluid (if 
equipped)" on page 8-45). Then check 
all brake components for fluid leaks. If 
any leak on the brake system is still 
found, the warning light remains on, 
or the brakes do not operate properly, 
do not drive the vehicle.
In this case, have the vehicle towed to 
a professional workshop and 
inspected. Kia recommends to visit an 
authorised Kia dealer/service partner.

Dual-diagonal braking system

Your vehicle is equipped with dual-diag

-

onal braking systems. This means you 
still have braking on two wheels even if 
one of the dual systems should fail.
With only one of the dual systems work

-

ing, more than normal pedal travel and 
greater pedal pressure are required to 
stop the vehicle.
Also, the vehicle will not stop in as short 
a distance with only a portion of the 
brake system working.
If the brakes fail whilst you are driving, 
shift to a lower gear for additional 
engine braking and stop the vehicle as 
soon as it is safe to do so.

WARNING

Parking Brake & Brake Fluid Warning 
Light

Driving the vehicle with a warning light 
ON is dangerous. If the Parking Brake & 
Brake Fluid Warning Light illuminates 
with the parking brake released, it indi

-

cates that the brake fluid level is low.
In this case, have the vehicle inspected 
by a professional workshop. Kia recom

-

mends to visit an authorised Kia dealer/
service partner.

Anti-lock brake system (ABS) 
warning light 

This warning light illuminates:

僅 Once you set the ignition switch 

orENGINE START/STOP button to the 
ON position.
- It illuminates for approximately 3 

seconds and then goes off.

僅 When there is a malfunction with the 

ABS (The normal braking system will 

Type A

Type B

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments