manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 163 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 163

79

4

4

Features of your vehicle

Warning and indicator lights

Warning and indicator lights

The warning light and indicator light 
indicate a situation where the driver 
should be careful and whether the vari

-

ous functions are activated.

Warning lights

The warning light indicates situations 
that require the driver to pay attention.

NOTICE

Warning lights

Make sure that all warning lights are 
OFF after starting the engine. If any light 
is still ON, this indicates a situation that 
needs attention.

Air bag warning light 

 (if 

equipped)

This warning light illuminates:

僅 Once you set the ignition switch or the 

ENGINE START/STOP button to the 
ON position.
- It illuminates for approximately 6 

seconds and then goes off.

僅 When there is a malfunction with the 

SRS.
In this case, have the vehicle 
inspected by a professional workshop. 
Kia recommends to visit an authorised 
Kia dealer/service partner.

Seat belt warning light 

This warning light informs the 
driver that the seat belt is not fas

-

tened.

* For more details, refer to "Seat belts" on 

page 3-16.

OMQ4040140L

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments