manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 157 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 157

73

4

4

Features of your vehicle

LCD display

Check exhaust system (if 
equipped)

僅 This warning message illuminates if 

the PPF system has a malfunction.

僅 At this time, PPF warning light also 

blinks.
In this case, have the vehicle 
inspected by a professional workshop. 
Kia recommended to visit an autho

-

rised Kia dealer/service partner.

* PPF : Petrol Particulate Filter

Low fuel

僅 This warning message is displayed if 

the fuel tank is almost out of fuel.

僅 When this message is displayed, the 

low fuel level warning light in the clus

-

ter will come on.

僅 It is recommended to look for the 

nearest fueling station and refuel as 
soon as possible.

Low washer fluid (if equipped)

僅 This warning message is displayed if 

the washer fluid level in the reservoir 
is nearly empty.

僅 Have the washer fluid reservoir 

refilled.

Check headlight LED (if 
equipped)

僅 This message is displayed if there is a 

problem with the LED headlamp. In 
this case, have the vehicle inspected 
by a professional workshop. Kia rec

-

ommended to visit an authorised Kia 
dealer/service partner.

Device in wireless charger (if 
equipped)

僅 This warning messages will illuminate 

when the vehicle ignition is in OFF 
and the smart phone is on the wire

-

less charging pad in below two situa

-

tions.

1. When the driver or passenger door is 

opened.

2. When one minute passed after the 

ignition has been turned OFF (and the 
door has not been opened for more 
than one minute).

* For more details, refer to "Wireless 

smart phone charging system (if 
equipped)" on page 4-146.

Battery discharging due to exter

-

nal electrical devices

僅 The vehicle can detect self-discharge 

of the battery due to over-current that 
is generated by unauthorised electri

-

cal devices such as dashboard cam

-

era (dash cam) mounting during 
parking.

僅 If the warning continues even after 

external electrical devices are 
removed, have your vehicle inspected 
by a professional workshop. Kia rec

-

ommends to contact an authorised 
Kia dealer/service partner.

NOTICE

When there is a malfunction with the 
Electronic Stability Control (ESC), the 
Electronic Control Suspension (ECS) 
warning message may illuminate as well 
as the Electronic Stability Control (ESC) 
indicator light.

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments