manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 152 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 152

Features of your vehicle

68

4

LCD display

If the service interval is activated and the time and distance is adjusted, messages are 
displayed in the following situations each time the vehicle is turned on.
僅 Service in: Displayed to inform the driver the remaining mileage and days to ser

-

vice.

僅 Service required: Displayed when the mileage and days to service has been 

reached or passed.

If any of the following conditions occur, the mileage and number of days to service 
may be incorrect.
僅 The battery cable is disconnected.
僅 The battery is discharged.

Units

* The information provided may differ depending on which functions are applicable 

to your vehicle.

Language

Reset

Wireless Charging System (if 

equipped)

僅 To activate or deactivate the Wireless Charging System function.
* For more details, refer to "Wireless smart phone charging system (if 

equipped)" on page 4-146.

Items

Explanation

Items

Explanation

Speed Unit

僅 km/h, MPH
To select the Speedometer unit.

Temperature Unit

僅 °C/°F
To select the Temperature unit.

Fuel Econ. Unit

僅 L/100km, km/L or US gallon, UK gallon
To select the Fuel economy unit.

Tyre Pressure Unit

僅 psi, kPa, bar
To select the Tyre Pressure Unit.

Items

Explanation

Language

僅 To select language.

Items

Explanation

Reset

You can reset the menus in the User Settings mode.

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments