manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 125 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 125

41

4

4

Features of your vehicle

Sunroof

ing a fire. Once refuelling is complete, 
check to make sure the filler cap and 
filler door are securely closed, before 
starting the engine.

僅 DO NOT use matches or a lighter and 

DO NOT SMOKE or leave a lit ciga

-

rette in your vehicle whilst at a gas 
station especially during refuelling. 
Automotive fuel is highly flammable 
and can result in fire when ignited.

僅 If a fire breaks out during refuelling, 

leave the vicinity of the vehicle, and 
immediately contact the manager of 
the gas station and then contact the 
local fire department. Follow any 
safety instructions they provide.

CAUTION

僅 Make sure to refuel your vehicle 

according to the "Fuel requirements" 
on page 1-2.

僅 If the fuel filler cap requires replace

-

ment, please make sure that you use 
parts designed for replacement in 
your vehicle. An incorrect fuel filler 
cap can result in a serious malfunc

-

tion of the fuel system or emission 
control system. For more detailed 
information, Kia recommends to con

-

tact an authorised Kia dealer/service 
partner.

僅 Do not spill fuel on the exterior sur

-

faces of the vehicle. Any type of fuel 
spilled on painted surfaces may dam

-

age the paint.

僅 After refuelling, make sure the fuel 

cap is installed securely to prevent 
fuel spillage in the event of an acci

-

dent.

Sunroof (if equipped)

If your vehicle is equipped with a sun

-

roof, you can slide or tilt your sunroof 
with the sunroof switch located on the 
overhead console.

The sunroof can only be operated when 
the ignition switch or the ENGINE 
START/STOP button is in the ON or 
START position.The sunroof can be 
operated for approximately 3 minutes 
after the ignition switch or the ENGINE 
START/STOP button is in the ACC or 
LOCK/OFF position. However, if the 
front door is open, the sunroof cannot 
be operated even within the 3 minutes 
period.

WARNING

僅 Adjust the sunroof or sunshade when 

your vehicle stops. This could result in 
loss of control and an accident that 
may cause injury, or property dam

-

age.

僅 Do not leave the engine running and 

the key in your vehicle with unsuper

-

vised children. Unattended children 
could operate the sunroof, which 
could result in serious injury.

僅 Do not sit on the top of the vehicle. It 

may cause injury or vehicle damage.

OBD041054

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments