manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 121 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 121

37

4

4

Features of your vehicle

Bonnet

Bonnet

The bonnet serves as a cover for the 
engine compartment.
Open the bonnet if maintenance work 
needs to be performed in the engine 
compartment or if you need to look at 
the compartment.

Opening the bonnet

1. Pull the release lever to unlatch the 

bonnet. The bonnet should pop open 
slightly.

WARNING

Open the bonnet after turning off the 
engine on a flat surface, shifting the shift 
lever to the P (Park, for Automatic Trans

-

mission/Dual Clutch Transmission/ Intel

-

ligent Variable Transmission) or first 
gear or R (Reverse, for Manual Trans

-

mission) and set the parking brake.

2. Go to the front of the vehicle, raise the 

bonnet slightly, push the secondary 
hood release lever (1) up side and lift 
the bonnet (2).

3. Pull out the support rod.
4. Hold the bonnet opened with the sup

-

port rod(3).

WARNING

Hot parts

Grasp the support rod in the area 
wrapped in rubber. The rubber will help 
prevent you from being burned by hot 
metal when the engine is hot.

Bonnet open warning (if 
equipped)

The bonnet warning message will 
appear on the LCD display when bonnet 
is open.

OBD041048R

OBD041049

OBD041086

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments