Kia Cerato 2022, Owner'S Manual, Page: 118 / 622

Features of your vehicle
34 4
Windows
pull up the switch momentarily to the
opposite direction of the window move
-
ment.
Type C - Auto up/down window
(if equipped)
Pressing or pulling up the power window
switch momentarily to the second detent
position (6) completely lowers or raises
the window even when the switch is
released. To stop the window at the
desired position whilst the window is in
operation, pull up or press down and
release the switch.
To reset the power windows
If the power window does not operate
normally, the automatic power window
system must be reset as follows:
1. Turn the ignition switch or ENGINE
START/STOP button to the ON posi
-
tion.
2. Close the window and continue pull
-
ing up the power window switch for at
least 1 second after the window is
completely closed.
Automatic reversal (for Type C)
(if equipped)
If the upward movement of the window
is blocked by an object or part of the
body, the window will detect the resis
-
tance and will stop upward movement.
The window will then lower approxi
-
mately 30 cm (11.8 inches) to allow the
object to be cleared.
If the window detects the resistance
whilst the power window switch is pulled
up continuously, the window will stop
upward movement then lower approxi
-
mately 2.5 cm (1 inch).
And if the power window switch is pulled
up continuously again within 5 seconds
after the window is lowered by the auto
-
matic window reversal feature, the auto
-
matic window reversal will not operate.
NOTICE
The automatic reverse feature for the
window is only active when the "auto up"
feature is used by fully pulling up the
switch. The automatic reverse feature
will not operate if the window is raised
using the halfway position on the power
window switch.
OBD042092R
OYB040607R