manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 109 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 109

25

4

4

Features of your vehicle

Trunk(For 4door)

Trunk(For 4door)

Opening the trunk

1. Make sure the shift lever is in P (Park, 

for Automatic Transmission/Dual 
Clutch Transmission/ Intelligent Vari

-

able Transmission) or first gear or R 
(Reverse, for Manual Transmission) 
and set the parking brake.

2. Then do one of the following :

僅 Press the Remote key or Smart Key 

Trunk Unlock button for more than 
one second.

僅 Press the button on the trunk itself 

with the Smart Key in your posses

-

sion.

僅 Use the mechanical key. (if 

equipped with key hole)

僅 To open the trunk from inside the 

vehicle, pull the trunk release lever.

WARNING

The trunk swings upward. Make sure no 
objects or people are near the rear of the 
vehicle when opening the trunk.

CAUTION

Make certain that you close the trunk 
before driving your vehicle. Possible 
damage may occur to the attached 
hardware if the trunk is not closed prior 
to driving.

NOTICE

In cold and wet climates, trunk lock and 
trunk mechanisms may not work prop

-

erly due to freezing conditions.

Closing the trunk

Lower the trunk lid and press down until 
it locks. To be sure the trunk lid is 
securely fastened, always check by try

-

ing to pull it up again.

NOTICE

If the trunk is closed with the smart key 
in it, the chime will sound for approxi

-

mately 3 seconds and the trunk will 
reopen.

WARNING

The trunk lid should be always kept 
completely closed whilst the vehicle is in 
motion. If it is left open or ajar, poison

-

ous exhaust gases may enter the car 
and serious illness or death may result.

OBD041039L

OBD041040R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments