Kia Cerato 2021 Manual Download Page 49

Page: 49 / 714

Safety features of your vehicle

Seat belts

To release the seat belt:

When you want to release the seat
belt, press the button (1) in the
locking Buckle.

WARNING

The centre lap belt latching mecha

nism is different from those for the
rear seat shoulder belts. When fas

tening the rear seat shoulder belts
or the centre lap belt, make sure
they are inserted into the correct
buckles to obtain maximum protec

tion from the seat belt system and
assure proper operation.

Pre-tensioner seat belt (if
equipped)

Your vehicle is equipped with driver's
and front passenger's pre-tensioner
seat belts (retractor pretensioner).

The purpose of the pre-tensioner is
to make sure that the seat belts fit
tightly against the occupant's body
in certain collisions.

The pre-tensioner seat belts may
be activated in crashes where the
collision is severe enough.

OJA030068L

OJA030069L

OJA030071L

OBD031209R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands