manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 428

Driving your vehicle

106

6

Blind-Spot Collision-Avoidance Assist (BCA)

judges that there is a collision risk 
with an approaching vehicle in the 
blind spot, the function will help 
avoid collision by applying the brake. 

When changing lanes by detecting 
the lane ahead, if the function 
judges that there is a collision risk 
with an approaching vehicle in the 
blind spot, the function will help 
avoid collision by applying the dif

-

ferential brake.

NOTICE

䳜 BCA stands for Blind-Spot Colli

-

sion-Avoidance Assist.

䳜 In the following text, Blind-Spot 

Collision-Avoidance Assist will be 
referred as Blind-Spot Safety 
system.

Detecting sensor

[1] : Front view camera, [2] : Rear 
corner radar

Refer to the picture above for the 
detailed location of the detecting 
sensors.

CAUTION

Take the following precautions to 
maintain optimal performance of 
the detecting sensor:
䳜 Never disassemble the rear corner 

radar or radar assembly, or apply 
any impact on it.

OBD051386L

OBD051015R

OBD051367

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands