manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 41

19

3

3

Safety features of your vehicle

Seat belts

secured and may hit the front seat 
occupants in a collision.

WARNING

Cargo loading

Make sure the engine is off, the 
automatic transmission is in P 
(Park) , and the parking brake is 
securely applied whenever loading 
or unloading cargo. Failure to take 
these steps may allow the vehicle to 
move if the shift lever is inadver

-

tently moved to another position.

Seat belts

Seat belt restraint system

WARNING

䳜 For maximum restraint system 

protection, the seat belts must 
always be used whenever the 
vehicle is moving.

䳜 Seat belts are most effective 

when seatbacks are in the upright 
position.

䳜 Children age 13 and under must 

always be properly restrained in 
the rear seat. Never allow children 
to ride in the front passenger 
seat. If a child over 13 must be 
seated in the front seat, he/she 
must be properly belted and the 
seat should be moved as far back 
as possible.

䳜 Never wear the shoulder belt 

under your arm or behind your 
back. An improperly positioned 
shoulder belt can cause serious 
injuries in a crash.
The shoulder belt should be posi

-

tioned midway over your shoulder 
across your collarbone.

䳜 Never wear a seat belt over frag

-

ile objects. If there is a sudden 
stop or impact, the seat belt can 
damage it.

䳜 Avoid wearing twisted seat belts. 

A twisted belt can't do its job well. 
In a collision, it could even cut into 

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands