Kia Cerato 2021, Manual

Page: 340 / 714

Driving your vehicle
18 6
ENGINE START/STOP button
NOTICE
䳜 If the battery is weak or the
smart key does not work cor
-
rectly, you can start the engine by
pressing the ENGINE START/STOP
button with the smart key. The
side with the lock button should
contact the ENGINE START/STOP
button directly. When you press
the ENGINE START/STOP button
directly with the smart key, the
smart key should contact the
button at a right angle.
䳜 When the stop lamp fuse is blown,
you can't start the engine nor -
mally. Replace the fuse with a
new one. If it is not possible, you
can start the engine by pressing
the ENGINE START/STOP button
for 10 seconds whilst it is in the
ACC position. The engine can start
without depressing the brake
pedal. But for your safety always
depress the brake pedal before
starting the engine.
CAUTION
Do not press the ENGINE START/
STOP button for more than 10 sec
-
onds except when the stop lamp
fuse is blown.
Do not turn the ignition switch to
the START position with the engine
running.
It may damage the starter.
Stopping the petrol engine
Manual Transmission
1. Make sure the vehicle is com
-
pletely stopped and keep the
clutch pedal and brake pedal
depressed.
2. Shift the transmission into Neu
-
tral whilst depressing the clutch
pedal and brake pedal.
3. Engage the parking brake whilst
depressing the brake pedal.
4. Turn the ignition key to the LOCK
position and remove it.
OBD051002R