manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 87 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 87

4 67

Features of your vehicle

The outside temperature on the dis-
play may not change immediately
like a general thermometer to pre-
vent the driver from being inattentive.
To change the temperature unit (from
°C to °F or from °F to °C) 

• Type A, D Cluster
Press the TRIP button for 5 seconds
and more.

• Type B, C, E, F Cluster
The temperature unit can be
changed by using the “User Settings”
mode of the LCD Windows.

❈

For more details, refer to “LCD
Windows” in this chapter.

Transaxle Shift Indicator

Automatic Transaxle Shift Indicator
(if equipped)

This indicator displays which auto-
matic transaxle shift lever is selected.

• Park  : P
• Reverse : R
• Neutral : N
• Drive  : D
• Sports Mode : S, 1, 2, 3, 4, 5, 6

Manual Transaxle Shift Indicator 
(if equipped)

This indicator informs which gear is
desired whilst driving to save fuel.
• Shifting up :

▲

2, 

▲

3, 

▲

4, 

▲

5, 

▲

6

• Shifting down :

▼

1, 

▼

2, 

▼

3, 

▼

4, 

▼

5

OBD048136L

OBD048137L

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments