manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 80 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 80

60

4

Features of your vehicle

INSTRUMENT CLUSTER

1. Tachometer 

2. Speedometer

3. Engine coolant temperature gauge

4. Fuel gauge

5. Warning and indicator lights

6. LCD display

OBD048154R/OBD048100R/OBD048101R

■

■

Type A (Petrol)

❈

The actual cluster in the vehicle may

differ from the illustration.
For more details, refer to the “Gauges”
in this chapter.

■

■

Type B (Petrol)

■

■

Type C (Petrol)

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments