manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 74 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 74

54

4

Features of your vehicle

✽

✽

NOTICE

The heated steering wheel will turn
off automatically approximately 30
minutes after the heated steering
wheel is turned on. 
If you turn off the ignition within 30
minutes after pressing the steering
wheel heater button, from next igni-
tion ON, the heater will be off.

Horn

To sound the horn, press the area
indicated by the horn symbol on your
steering wheel (see illustration). The
horn will operate only when this area
is pressed. Check the horn regularly
to be sure it operates properly.

CAUTION

Do not install any grip to oper-
ate the steering wheel. This
causes damage to the heated
steering wheel system.

OBD048068

CAUTION

• Do not strike the horn severe-

ly to operate it, or hit it with
your fist. Do not press on the
horn with a sharp-pointed
object.

• When cleaning the steering

wheel, do not use an organic
solvent such as thinner, ben-
zene, alcohole and petrol.
Doing so may damage the
steering wheel.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments