manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 68 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 68

48

4

Features of your vehicle

Sliding the sunroof 

To open the sunroof, push the sun-
roof control lever backward.
To close the sunroof, push the sun-
roof control lever forward.

To open the sunroof automatically:

Pull the sunroof control lever back-
ward to the second detent position
and then release it. The sunroof will
slide to the recommended open posi-
tion (about 5 cm before the maxi-
mum slide open position).
To stop the sunroof sliding at any
point, push the sunroof control lever
momentarily.

To close the sunroof automatically:

Push the sunroof control lever for-
ward to the second detent position
and then release it. The sunroof will
automatically close all the way.
To stop the sunroof sliding at any
point, push the sunroof control lever
momentarily.

✽

✽

NOTICE

To reduce wind noise whilst driving,
it is recommended that you drive
with the sunroof slightly closed (stop
the sunroof about 5cm(2in.) before
the maximum slide open position).

WARNING 

Make sure heads, other body
parts or other objects are safely
out of the way before closing
the window to avoid injuries or
vehicle damage.
Objects less than 4 mm (0.16
inch) in diameter caught
between the sunroof glass and
the front window channel may
not  be detected by the auto-
matic reverse window and the
window will not stop and
reverse direction.

OBD048063

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments