manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 63 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 63

4 43

Features of your vehicle

WARNING 

• Always double check to be

sure that the bonnet is firmly
latched before driving away. If
it is not latched, the bonnet
could open whilst the vehicle
is being driven, causing total
loss of visibility, which might
result in an accident.

• Do not move the vehicle with

the bonnet raised. The view
will be blocked and the bon-
net could fall or be damaged.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments