manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 603 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 603

9 13

Specifications & Consumer information

VEHICLE IDENTIFICATION NUMBER (VIN)

The vehicle identification number
(VIN) is the number used in register-
ing your car and in all legal matters
pertaining to its ownership, etc.
The number is punched on the floor
under the driver or passenger seat.
To check the number, remove the
cover (1).

VIN label (if equipped)

The VIN is also on a plate attached
to the top of the dashboard. The
number on the plate can easily be
seen through the windscreen from
outside.

The vehicle certification label
attached on the driver’s (or front pas-
senger’s) side centre pillar gives the
vehicle identification number (VIN).

VEHICLE CERTIFICATION
LABEL (IF EQUIPPED)

OBD088002

■

Type A

OJFW086015R

OBH088005N

■

Type A

■

Type B

OYB086005R

OYB086005

■

Type A

■

Type B

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments