manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 60 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 60

40

4

Features of your vehicle

WARNING - 

Windows

• NEVER leave the keys in your

vehicle with unsupervised
children, when the engine is
running.

• NEVER leave any child unat-

tended in the vehicle. Even
very young children may inad-
vertently cause the vehicle to
move, entangle themselves in
the windows, or otherwise
injure themselves or others.

• Always double check to make

sure all arms, hands, head
and other obstructions are
safely out of the way before
closing a window.

• Do not allow children play with

the power windows. Keep the
driver’s door power window
lock button in the LOCK posi-
tion (pressed). Serious injury
can result from unintentional
window operation by the child.

• Do not extend heads or any

limbs outside the window
whilst the vehicle is in motion.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments