Kia Cerato 2019 Owner'S Manual Download Page 59 | Manualshive

Page: 59 / 617

Kia Cerato 2019 Owner'S Manual Download Page 59

4 39

Features of your vehicle

Power window lock button

The driver can disable the power
window switches on the rear passen-
gers’ doors by pressing the power
window lock button to the lock posi-
tion (pressed).
When the power window lock button
is pressed :
• The driver’s master control can

operate the front passenger’s power
window but cannot operate the rear
passenger’s power windows.

• The front passenger’s control can

operate the front passenger’s
power window.

• The rear passengers’ control can-

not operate the rear passenger’s
power window.

OBD048047R

CAUTION

• To prevent possible damage

to the power window system,
do not open or close two win-
dows or more at the same
time. This will also ensure the
longevity of the fuse.

• Never try to operate the main

switch on the driver's door
and the individual door win-
dow switch in opposite direc-
tions at the same time. If this is
done, the window will stop and
cannot be opened or closed.

«
...
57
58
59
60
61
...
»

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments