manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 561 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 561

8 119

Maintenance

Trunk room lamp replacement

1. Open the trunk lid.
2. Remove the lamp assembly by

using a flat-blade screwdriver.

3. Remove the cover from the lamp

assembly.

4. Remove the bulb by pulling it

straight out.

5. Install a new bulb in the socket.
6. Install the cover to the lamp

assembly.

7. Install the lamp assembly to the

body of the vehicle.

Tailgate room lamp bulb
replacement

1. Using a flat-blade screwdriver,

gently pry the lens cover from
lamp housing.

2. Remove the bulb by pulling it

straight out.

3. Install a new bulb in the socket.
4. Align the lens cover tabs with the

lamp housing notches and snap
the lens into place.

✽

✽

NOTICE

If the LED lamp does not operate,
have your vehicle checked by a pro-
fessional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.

OND077040CN

CAUTION

Be careful not to dirty or dam-
age the lens, lens tab, and plas-
tic housings.

OJFW076213L

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments