manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 555 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 555

8 113

Maintenance

Rear fog lamp (LED type) bulb
replacement (Rear combina-
tion lamp Type D)

If the rear fog lamp (LED) (1) does
not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the rear fog lamp (LED), for it
may damage related parts of the
vehicle.

Rear turn signal lamp bulb
replacement

If the rear turn signal lamp (1) does
not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.

Back up lamp bulb replace-
ment

If the back up lamp (1) does not
operate, have your vehicle checked
by a professional workshop. Kia rec-
ommends to visit an authorised Kia
dealer/service partner.

OBD078051L

OBD078052

OBD078128L

■

Type A

■

Type B

OBD078053

OBD078053L

■

Type A

■

Type B

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments