Kia Cerato 2019 Owner'S Manual Download Page 551

Page: 551 / 617

8 109

Maintenance

5. Insert a new bulb in the socket.
6. Reassemble the socket and the

lens part.

7. Connect the bulb electrical con-

nector.

8. Reinstall the lamp assembly to the

body of the vehicle.

Stop and tail lamp (Bulb type)
bulb replacement (Rear combi-
nation lamp Type A, B)

1. Open the trunk lid.
2. Open the service cover.
3. Remove the nuts from the vehicle.

4. Remove the rear combination

lamp assembly from the body of
the vehicle.

5. Remove the socket from the

assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.

OBD078045

OBD078046

OBD078047

OBD078048

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2019

Reviews:

Kia Cerato 2019, Owner'S Manual, Page: 551 / 617

Search results

Summary of Contents for Cerato 2019

Reviews: