manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 550 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 550

108

8

Maintenance

Front fog lamp bulb replace-
ment

If the front fog lamp (1) does not
operate, have your vehicle checked
by a professional workshop. Kia rec-
ommends to visit an authorised Kia
dealer/service partner.

Side repeater lamp (LED type)
bulb replacement

If the side repeater lamp (LED) does
not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the side repeater lamp (LED),
for it may damage related parts of
the vehicle.

Side repeater lamp (Bulb type)
bulb replacement

1. Remove the lamp assembly from

the vehicle by prying the lens and
pulling the assembly out.

2. Disconnect the bulb electrical con-

nector.

3. Separate the socket and the lens

parts by turning the socket coun-
terclockwise until the tabs on the
socket align with the slots on the
lens part.

4. Remove the bulb by pulling it

straight out.

OBD078044

OBD078038

OTA070028

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments