manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 546 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 546

104

8

Maintenance

Light bulb position (Side)

(1) Side repeater lamp (LED type)
(2) Side repeater lamp (bulb type)

Headlamp (Low beam) bulb
replacement (Headlamp Type
A, B)

1. Open the bonnet.
2. Remove the headlamp bulb cover

by turning it counterclockwise.

3. Disconnect the headlamp bulb

socket-connector.

4. Remove the bulb-socket from the

headlamp assembly by turning the
bulb-socket counterclockwise until
the tabs on the bulb-socket align
with the slots on the headlamp
assembly.

5. Install a new bulb-socket assem-

bly in the headlamp assembly by
aligning the tabs on the bulb-sock-
et with the slots in the headlamp
assembly. Push the bulb-socket
into the headlamp assembly and
turn the bulb-socket clockwise.

6. Connect the headlamp bulb sock-

et-connector.

7. Install the headlamp bulb cover by

turning it clockwise.

OBD078038

OBD078062

■

Type A

■

Type B

OBD078039

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments