manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 530 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 530

88

8

Maintenance

Instrument panel (Driver’s side fuse panel)

Description

Symbol

Fuse rating

Circuit Protected

MEMORY 1

MEMORY

1

10A

Driver IMS (Integrated memory system) Module, Air Conditioner Control Module,
Instrument Cluster, Auto Light & Photo Sensor

MODULE 1

MODULE

1

10A

Key Interlock Switch, Multipurpose Check Connector, Data Link Connector, ICM (Integrated
Circuit Module) Relay Box (Outside Mirror Folding/Unfolding Relay), Console Switch Right
Handle side, Hazard Switch, Driver/Passenger Smart Key Outside Handle, Mood Lamp
Control Unit

TRUNK

10A

Trunk Relay

POWER WINDOW

RH

RH

25A

Power Window Right Handle side Relay

POWER WINDOW

LH

LH

25A

Power Window Left Handle side Relay, Driver Safety Power Window Module

POWER SEAT

DRIVER

DRV

25A

Driver IMS (Integrated memory system) Module, Driver Seat Manual Switch

MODULE 4

MODULE

4

7.5A

Dosing Control Module, Lane Keeping Assist Unit, IBU (Integrated Body Control Unit),
Forward Collision Avoidance Assist Unit, Blind-Spot Collision Warning Unit Left Handle
side/Right Handle side

E-CALL

E-CALL

10A

MTS (Mozen Telematics System) E-Call Module

SEAT HEATER

REAR

RR

20A

Rear Seat Warmer Control Module

HEATED MIRROR

10A

Driver/Passenger Power Outside Mirror, Air Conditioner Control Module, ECM (Engine
Control Module)/PCM (Power train Control Module)

SEAT HEATER

FRONT

FRT

20A

Front Seat Warmer Control Module, Front Air Ventilation Seat Control Module

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments