manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 53 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 53

4 33

Features of your vehicle

3. Automatic opening
The hazard warning lights will blink
and chime will sound 2 times and
then the trunk will slowly open.

How to deactivate the Smart
Trunk function using the smart
key

1. Door lock
2. Door unlock
3. Trunk open

If you press any button of the smart
key during the Detect and Alert
stage, the Smart Trunk function will
be deactivated.
Make sure to be aware of how to
deactivate the Smart Trunk function
for emergency situations.

OBD048044

WARNING

• Make certain that you close

the trunk before driving your
vehicle.

• Make sure there are no people

or objects around the trunk-
before opening or closing the
trunk.

• Make sure objects in the rear

cargo area do not come out
when opening the trunk on
the slope way. It may cause
serious injury.

• Make sure to deactivate the

Smart trunk function when
washing your vehicle.
Otherwise, the trunk may
open inadvertently.

• The key should be kept out of

reach of children. Children may
inadvertently open the Smart
Trunk whilst playing around
the rear area of the vehicle.

OBD048031L

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments