manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 526 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 526

84

8

Maintenance

✽

✽

NOTICE

If the multi fuse is blown, consult a
professional workshop. Kia recom-
mends to consult an authorised Kia
dealer/service partner.

Main fuse

If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery

cable.

3. Remove the nuts shown in the pic-

ture above.

4. Replace the fuse with a new one

of the same rating.

5. Reinstall in the reverse order of

removal

If the main fuse is blown, even
though the engine compartment
panel fuse and inner fuse are not
blown, if the electrical system is not
operated, the main fuse may be
blown. The main fuse is connected
with other parts and system. Contact
a professional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.

OBD078020

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments