manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 523 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 523

8 81

Maintenance

✽

✽

NOTICE

- Random wiring pro-

hibited when retrofitting equip-
ment

Use of random wiring in the vehicle
might cause danger due to failure
and damage of the vehicle’s per-
formance. 
Using random wires especially when
retrofitting AVN or theft alarm sys-
tem, remote engine control, car
phone or radio might damage the
vehicle or cause fire.

✽

✽

NOTICE

- Remodeling

Prohibited

Do not try remodeling the vehicle in
any way. It is illegal, and may affect
the vehicle’s performance, durabili-
ty, and safety. Warranty is also not
provided for problems caused by
remodeling. 
Be aware of safety problems caused
by remodeling the vehicle with
unauthorised electrical
devices(lamp, black box, electrical
equipment, diagnostic device, com-
munication device, etc.). It might
cause malfunction of the vehicle,
wiring damage, battery discharge,
connector damage, or fire. the vehi-
cle or cause fire.

✽

✽

NOTICE

- Window tinting

precaution

Window tint(especially metallic
film) might cause communication
disorder or poor radio reception,
and malfunction of the automatic
lighting system due to excessive
change of illumination inside the
vehicle. The solution used might also
flow into electric, electronic devices
causing disorder and failure. 

CAUTION

Visually inspect the battery cap
to ensure it is securely closed.
If the battery cap is not securely
closed, moisture may enter the
system and damage the electri-
cal components.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments