manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 496 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 496

54

8

Maintenance

FUEL FILTER (FOR DIESEL)

Draining water from the fuel
filter

The fuel filter for diesel engine plays
an important role of separating water
from fuel and accumulating the water
in its bottom.
If water accumulates in the fuel filter,
the warning light comes on when the
ignition switch is in the ON position.

If this warning light illumi-
nates, take your car to a pro-
fessional workshop and have
drain the water and check
the system. Kia recommends
to visit an authorised Kia
dealer/service partner.

Fuel filter cartridge replacement

✽

✽

NOTICE

When replacing the fuel filter car-
tridge, use parts for replacement
from a professional workshop. Kia
recommends to visit an authorised
Kia dealer/service partner.

CAUTION

If the water accumulated in the
fuel filter is not drained at prop-
er times, damages to the major
parts such as the fuel system
can be caused by water perme-
ation in the fuel filter.

OYB076017

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments