manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 492 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 492

50

8

Maintenance

Changing the coolant

Have the coolant replaced by a pro-
fessional workshop. Kia recommends
to visit an authorised Kia dealer/serv-
ice partner.

CAUTION

Put a thick cloth around the
radiator cap before refilling the
coolant in order to prevent the
coolant from overflowing into
engine parts such as the alter-
nator.

WARNING

- Coolant

• Do not use radiator coolant or

antifreeze in the washer fluid
reservoir.

• Radiator coolant can severely

obscure visibility when
sprayed on the windscreen
and may cause loss of vehicle
control or damage the paint
and body trim.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments