manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 487 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 487

8 45

Maintenance

If it is near or at L (Low), add enough
oil to bring the level to F (Full).

Do

not overfill.

Use only the specified engine oil.
(Refer to “Recommended lubricants
and capacities” in chapter 9.)

Changing the engine oil and
filter

Have the engine oil and filter
replaced by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.

OCD078006

■

SmartStream D 1.6 Engine (Diesel)

WARNING

Used engine oil may cause skin
irritation or cancer if left in con-
tact with the skin for prolonged
periods of time. Used engine oil
contains chemicals that have
caused cancer in laboratory
animals. Always protect your
skin by washing your hands
thoroughly with soap and warm
water as soon as possible after
handling used oil.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments