manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 486 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 486

44

8

Maintenance

ENGINE OIL (DIESEL)

Checking the engine oil level

1. Be sure the vehicle is on level

ground.

2. Start the engine and allow it to

reach normal operating tempera-
ture.

3. Turn the engine off and wait for a

few minutes (about 5 minutes) for
the oil to return to the oil pan.

4. Pull the dipstick out, wipe it clean,

and re-insert it fully.

5. Pull the dipstick out again and

check the level.

6. The level should be in the C range.

If the level is in the D range, add
enough engine oil to bring the
level up to the C range.

OCD078005

■

SmartStream D 1.6 Engine (Diesel)

WARNING

- Radiator hose

Be very careful not to touch the
radiator hose when checking or
adding the engine oil as it may
be hot enough to burn you.

CAUTION

• Do not spill engine oil, when

adding or changing engine oil.
If you drop the engine oil on
the engine room, wipe it off
immediately.

• When you wipe the oil level

gauge, you should wipe it with
a clean cloth. When mixed
with debris, it can cause
engine damage.

Figure

Required action accord-

ing to the respective

engine oil level

Range (A)

Contact an authorised Kia

dealer/service partner.

Range (B)

Do not refill oil.

Range (C)

Normal.

You may add oil as long as

the oil level does not go

above C-range.

Range (D)

You must add oil and make

sure that the oil level is in

the C-Range.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments