Kia Cerato 2019 Owner'S Manual Download Page 451

Page: 451 / 617

8 9

Maintenance

At least monthly:

• Check the coolant level in the

engine coolant reservoir.

• Check the operation of all exterior

lights, including the stoplights, turn
signals and hazard warning flash-
ers.

• Check the inflation pressures of all

tyres including the spare for tyres
that are worn, show uneven wear,
or are damaged.

• Check for loose wheel lug nuts.

At least twice a year
(i.e., every Spring and Fall):

• Check the radiator, heater and air

conditioning hoses for leaks or
damage.

• Check the windscreen washer

spray and wiper operation. Clean
the wiper blades with clean cloth
dampened with washer fluid.

• Check the headlight alignment.
• Check the muffler, exhaust pipes,

shields and clamps.

• Check the lap/shoulder belts for

wear and function.

At least once a year:

• Clean the body and door drain

holes.

• Lubricate the door hinges and

checks, and bonnet hinges.

• Lubricate the door and bonnet

locks and latches.

• Lubricate the door rubber weather-

strips.

• Check the air conditioning system.
• Clean the battery and terminals.
• Check the brake / clutch fluid level.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2019

Reviews:

Kia Cerato 2019, Owner'S Manual, Page: 451 / 617

Search results

Summary of Contents for Cerato 2019

Reviews: