manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 433 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 433

7 23

What to do in an emergency

• Avoid driving over obstacles. The

compact spare tyre diameter is
smaller than the diameter of a con-
ventional tyre and reduces the
ground clearance approximately
2.5 cm (1 inch), which could result
in damage to the vehicle.

• Do not take the vehicle through an

automatic car wash whilst the com-
pact spare tyre is installed.

• Do not use tyre chains on the tem-

porary compact tyre. Because of
the smaller size, a tyre chain will
not fit properly. This could damage
the vehicle and result in loss of the
chain.

• Temporary compact tyre should

not be installed on the front axle if
the vehicle must be driven in snow
or on ice.

• Do not use the temporary compact

tyre on any other vehicle because
this tyre has been designed espe-
cially for your vehicle.

• The temporary compact tyre tread

life is shorter than a regular tyre.
Inspect your temporary compact
tyre regularly and replace worn
compact spare tyres with the same
size and design, mounted on the
same wheel.

• The temporary compact tyre

should not be used on any other
wheels, nor should standard tyres,
snow tyres, wheel covers or trim
rings be used with the temporary
compact  spare wheel. If such use
is attempted, damage to these
items or other car components
may occur.

• Do not use more than one tempo-

rary compact tyre at a time.

• Do not tow a trailer whilst the tem-

porary compact tyre is installed.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments