manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 427 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 427

7 17

What to do in an emergency

Changing tyres

1. Park on a level surface and apply

the parking brake firmly.

2. Shift the shift lever into R (Reverse)

with manual transaxle or P (Park)
with automatic transaxle / dual
clutch transmission.

3. Activate the hazard warning flasher.

4. Remove the wheel lug nut wrench,

jack, jack handle, and spare tyre
from the vehicle.

5. Block both the front and rear of

wheel that is diagonally opposite
the jack position.

OED066033

1JBA6504

WARNING

- Changing a

tyre

• To prevent vehicle movement

whilst changing a tyre, always
set the parking brake fully,
and always block the wheel
diagonally opposite the wheel
being changed.

• We recommend that the

wheels of the vehicle be
chocked, and that no person
remain in a vehicle that is
being jacked.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments