manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 421 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 421

7 11

What to do in an emergency

■

■

Indication of Low Tyre Pressure

The (

) warning light will illumi-

nate when an under-inflated tyre is
indicated. In certain types, the above
message might be displayed on the
cluster.

If the warning light illuminates, reduce
your speed, avoid hard cornering and
rapid braking. Have your vehicle
inspected by a professional work-
shop. Kia recommends to visit an
authorised Kia dealer/service partner.

Check the pressure of all tyres and
inflate to the proper pressure accord-
ing to procedures, and if required,
replace or repair the tyres.
If you cannot reach a close service
station, stop the vehicle at a safe
place, check all tyres and operate the
TPMS setting procedure. If you are
unable to adjust the tyre pressure, use
the repair tools to repair or change to
spare tyre and contact a professional
workshop.
Kia recommends to call an autho-
rised Kia dealer/service partner.
You may not be able to identify low
tyre pressure visually. Use precise
tools to measure and adjust tyre pres-
sure.
Please note that a tyre that is hot due
to prolonged driving, therefore will
have high pressure. We recommend
you to measure and adjust the tyre
pressure after the vehicle has driven
for less than 1.6 km (1 mile) within 3
hours.

OBD068032R

CAUTION

• The indicator may remain illu-

minated after changing to a
spare tyre, because radius of
spare tyre is different. Be sure
to change to a regular tyre.

• For safe driving, please note

that the TPMS is not a substi-
tute for proper tyre mainte-
nance.

It is the driver’s

responsibility to maintain cor-
rect tyre pressure, and all
tyres should be checked
monthly to maintain the rec-
ommended pressure.

• The warning light may illumi-

nate if the system is not set in
required situations.

(Continued)

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments