Kia Cerato 2019, Owner'S Manual, Page: 419 / 617

7 9
What to do in an emergency
TYRE PRESSURE MONITORING SYSTEM (TPMS) (IF EQUIPPED)
(1) Low tyre pressure telltale
(2) TPMS SET switch
■ ■
System Overview
The tyre pressure monitoring system
(TPMS) senses change in radius of
the tyre. If the tyre pressure decreas-
es below the recommended pres-
sure, the system warning light will be
illuminated.
For the system to function properly, it
is the driver’s responsibility to set the
system by following accurate proce-
dure and set current tyre pressure.
The warning light will illuminate on the
cluster when one or more of your tyres
is under-inflated after the TPMS is set.
The warning light will also illuminate to
warn the driver of system malfunction.
Please refer to the above image (1)
for further information.
■ ■
TPMS Setting
The driver can set the TPMS by fol-
lowing procedures below:
1) Inflate all tyres to the recommend-
ed pressure.
2) Start the engine, make sure the
vehicle is not moving, and press
the TPMS switch (2) right side on
the driver’s seat for over 3 sec-
onds.
3) Check if the ( ) warning indica-
tor blinks for 4 seconds.
OBD068005R
OBD068022R