manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 393 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 393

6 153

Driving your vehicle

Fuel, engine coolant and engine
oil

High speed travel consumes more
fuel than urban motoring. Do not for-
get to check both engine coolant and
engine oil.

Drive belt

A loose or damaged drive belt may
result in overheating of the engine.

WARNING

• Underinflated or overinflated

tyres can cause poor han-
dling, loss of vehicle control,
and sudden tyre failure lead-
ing to accidents, injuries, and
even death. Always check
tyres for proper inflation
before driving. For proper tyre
pressures, refer to “Tyres and
wheels” in chapter 9.

• Driving on tyres with no or

insufficient tread is danger-
ous.

Worn-out tyres can

result in loss of vehicle con-
trol, collisions, injury, and
even death.

Worn-out tyres

should be replaced as soon
as possible and should never
be used for driving. Always
check the tyre tread before
driving your car. For further
information and tread limits,
refer to “Tyres and wheels” in
chapter 8.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments