manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 385 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 385

6 145

Driving your vehicle

System malfunction

When the “Check Driver Attention
Warning (DAW) system” warning
message appears, the system is not
working properly. In this case, have
the system checked by a profession-
al workshop. Kia recommends to visit
an authorised Kia dealer/service
partner.

✽

✽

NOTICE

The Driver Attention Warning
(DAW) system utilizes the camera
sensor on the front windscreen for
its operation.
To keep the camera sensor in the
best condition, you should observe
the followings:
- Do not disassemble camera tem-

porarily for tinted window or
attaching any types of coatings and
accessories. If you disassemble a
camera and assemble it again, take
your vehicle to an authorised Kia
dealer

and have the system

checked to need a calibration.

- Do not locate any reflective

objects (i.e. white paper, mirror)
over the dashboard. Any light
reflection may cause a mal-func-
tion of the Driver Attention
Warning (DAW) system.

- Pay extreme caution to keep the

camera sensor out of water. 

- Do not arbitrarily disassemble the

camera assembly, nor apply any
impact on the camera assembly.

• Playing the vehicle audio system at

high volume may offset the Driver
Attention Warning (DAW) system
warning sounds.

OJF058429L

WARNING

• The Driver Attention Warning

(DAW) system is not a substi-
tute for safe driving practices,
but a convenience function
only. It is the responsibility of
the driver to always drive cau-
tiously to prevent unexpected
and sudden situations from
occurring. Pay attention to the
road conditions at all times.

• It may suggest a break

according to the driver’s driv-
ing pattern or habits even if
the driver doesn’t feel
fatigued.

• The driver, who feels fatigued,

should take a break, even
though there is no break sug-
gestion by the Driver
Attention Warning (DAW) sys-
tem.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments