manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 383 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 383

6 143

Driving your vehicle

Display of the driver’s attention
level

• The driver can monitor their driving

conditions on the LCD display.
The DAW screen will appear when
you select the Assist Mode tab on
the LCD display if the system is
activated. (For more information,
refer to "User Settings Mode" in
chapter 4.)

• The driver’s attention level is dis-

played on the scale of 1 to 5. The
lower the number is, the more inat-
tentive the driver is.

• The level decreases when the driv-

er does not take a break for a cer-
tain period of time.

• The level increases when the driv-

er attentively drives for a certain
period of time.

• When the driver turns on the sys-

tem whilst driving, it displays ‘Last
break’ and level reflected that.

Consider taking a break

• The “Consider taking a break”

message appears on the LCD dis-
play and a warning sounds in order
to suggest the driver to take a
break, when the driver’s attention
level is below 1.

• The Driver Attention Warning

(DAW) system does not suggest
the driver to take a break, when the
total driving time is shorter than 10
minutes.

OBD058109R

OBD058108R

OBD058110R

OJF058426L

■

System off

■

Attentive driving

■

Inattentive driving

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments