manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 370 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 370

Driving your vehicle

130

6

When front visibility is poor

- The lens or windscreen is covered

by strange materials.

- The sensor cannot detect the lane

because of fog, heavy rain or snow.

- The windscreen is fogged by

humid air in the vehicle.

- Putting something on the crash

pad and etc.

▲

WARNING  

The Lane Keeping Assist (LKA)
System is a system to help pre-
vent the driver from leaving the
lane (or road edge). However,
the driver should not solely rely
on the system but always take
the necessary actions for safe
driving practices.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments