manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 367 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 367

6 127

Driving your vehicle

Keep hands on steering wheel
(When LKA is activated)

If the driver takes hands off the steer-
ing wheel for several seconds whilst
the LKA is activated, the system will
warn the driver.

Warning light and message

Check LKA (Lane Keep Assist) system

The LKA failure indicator (yellow) will
illuminate if the LKA is not working
properly. In this case, have the system
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.

OBD058111R

WARNING  

• The warning message may

appear late according to road
conditions. Therefore, always
have your hands on the steer-
ing wheel whilst driving.

• If you hold the steering wheel

lightly, the system would gen-
erate hands off warning
because LKA can treat the sit-
uation as you do not grab the
wheel.

OBD058112R

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments