manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 353 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 353

6 113

Driving your vehicle

(Continued)
• As the smart cruise control

system may not recognize
complex driving situations,
always pay attention to driv-
ing conditions and control
your vehicle speed.

• For safe operation, carefully

read and follow the instruc-
tions in this manual before use.

• After an engine start, please

stop for several seconds. If
system initialization is not
completed, the SCC does not
normally operate.

• After an engine start, if any

objects are not detected or the
sensor cover is obscured with
foreign substances, there is a
possibility that the SCC sys-
tem may not work.

• Below conditions are not

allowed: over baggage loading
in a trunk(tailgate), suspen-
sion remodeling, tyre replace-
ment with unauthorised tyres
or tyres with different worn-
out and pressure levels.

(Continued)
• When other vehicles are

changing lanes in front of you
frequently, the smart cruise
control system may not oper-
ate appropriately. Always look
ahead cautiously to prevent
unexpected and sudden situa-
tions from occurring.

• The smart cruise control sys-

tem is not a substitute for safe
driving practices but a con-
venience function only. It is
the responsibility of the driver
to always check the speed
and the distance to the vehi-
cle ahead.

• Always be aware of the select-

ed speed and vehicle to vehi-
cle distance.

• Always maintain sufficient

braking distance and deceler-
ate your vehicle by applying
the brakes if necessary.

(Continued)

CAUTION

The Smart Cruise Control sys-
tem may not operate temporari-
ly due to:
• Electrical interference
• Modifying the suspension
• Differences of tyre abrasion or

tyre pressure

• Installing different type of

tyres

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments