manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 340 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 340

Driving your vehicle

100

6

Smart cruise control will be tem-
porarily cancelled when:

Cancelled manually

The smart cruise control is temporar-
ily cancelled when the brake pedal is
depressed or the CANCEL/O button
is pressed. Depress the brake pedal
and press the CANCEL/O button at
the same time, when the vehicle is at
a standstill. The speed and vehicle to
vehicle distance indicator on the
cluster is disappeared and the
CRUISE/

indicator is illumi-

nated continuously.

Cancelled automatically

• The driver's door is opened.
• The shift lever is shifted to N

(Neutral), R (Reverse) or P (Paking).

• The vehicle speed is over 190

km/h (120 mph)

• The ESC, ABS or TCS is operating.
• The ESC is turned off.
• The sensor or the cover is dirty or

blocked with foreign matter.

• The accelerator pedal is continu-

ously depressed for long time.

• The engine speed is in dangerous

range.

• The SCC system has malfunc-

tioned.

• When the braking control is operat-

ed for Forward Collision-Avoidance
Assist(FCA)

• The vehicle stops and goes repeat-

edly for a long period of time.

• When the parking brake is locked.
• Engine has some problems.
• When the vehicle speed drops

below 10 km/h (6 mph).

OBD058099R

OBD058100R

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments