manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 331 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 331

6 91

Driving your vehicle

You can set the speed limit when you
do not want to drive over a specific
speed.
If you drive over the preset speed
limit, the warning system operates
(set speed limit will blink and chime
will sound) until the vehicle speed
returns within the speed limit.

✽

✽

NOTICE

Whilst speed limit control is in oper-
ation, the cruise control system can-
not be activated.

Speed limit control switch

O: Cancels set speed limit.

: Turns speed limit control

system on or off.

RES+: Resumes or increases speed

limit control speed.

SET-: Sets or decreases speed limit

control speed.

To set speed limit :

1. Press the speed limit 

but-

ton twice on the steering wheel, to
turn the system on.

The speed limit indicator light will illu-
minate.

SPEED LIMIT CONTROL SYSTEM (IF EQUIPPED)

OBD058082R

OBD058019R

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments