manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 315 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 315

6 75

Driving your vehicle

Collision warning! (1st warning)

This warning message appears on
the LCD display with a warning
chime.
Additionally, some vehicle system
intervention occurs by the engine
management system to help decel-
erate the vehicle.
- Your vehicle speed may decelerate

moderately.

- The FCA system limitedly controls

the brakes to preemptively mitigate
impact in a collision.

Emergency braking! (2nd warning)

This warning message appears on
the LCD display with a warning
chime.
Additionally, some vehicle system
intervention occurs by the engine
management system to help decel-
erate the vehicle.
- The FCA system limitedly controls

the brakes to preemptively mitigate
impact in a collision. The brake con-
trol is maximized just before a colli-
sion.

Brake operation

• In an urgent situation, the braking

system enters into the ready status
for prompt reaction against the dri-
ver’s depressing the brake pedal.

• The FCA provides additional brak-

ing power for optimum braking per-
formance, when the driver
depresses the brake pedal.

• The braking control is automatical-

ly deactivated, when the driver
sharply depresses accelerator
pedal or when the driver abruptly
operates the steering wheel.

• The braking control is automatical-

ly cancelled, when risk factors dis-
appear.

OBD058065R

OBD058066R

CAUTION

The driver should always pay
great caution to vehicle opera-
tion, even though there is no
warning message or warning
alarm.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments