manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 294 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 294

Driving your vehicle

54

6

• State 2
Press the ESC OFF button for more
than 3 seconds. ESC OFF indicator
light and message illuminates and
ESC OFF warning chime will sound.
At this state, the engine control func-
tion and brake control function does
not operate. In other words, the vehi-
cle stability control function does not
operate any more.

If the ignition switch is placed to the
LOCK/OFF position when ESC is off,
ESC remains off. Upon restarting the
engine, the ESC will automatically
turn on again.

Indicator light

When ignition switch is turned to ON,
the indicator light illuminates, then
goes off if the ESC system is operat-
ing normally.
The ESC indicator light blinks when-
ever ESC is operating or illuminates
when ESC fails to operate.
ESC OFF indicator light comes on
when the ESC is turned off with the
button.

■

ESC indicator light 

■ 

ESC OFF indicator light 

OBD058092R

OBD058093R

■

Type A

■

Type B

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments